CVE-2024-50280 |
Description: In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
An unexpected WARN_ON from flush_work() may occur when cache creation
fails, caused by destroying the uninitialized delayed_work waker in the
error path of cache_create(). For example, the warning appears on the
superblock checksum error.
Reproduce steps:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890
Fix by pulling out the cancel_delayed_work_sync() from the constructor's
error path. This patch doesn't affect the use-after-free fix for
concurrent dm_resume and dm_destroy (commit 6a459d8edbdb ("dm cache: Fix
UAF in destroy()")) as cache_dtr is not changed.
CVSS: LOW (0.0) EPSS Score: 0.05%
December 12th, 2024 (5 months ago)
|
CVE-2024-50267 |
Description: In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_edgeport: fix use after free in debug printk
The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb)
is a use after free of the "urb" pointer. Store the "dev" pointer at the
start of the function to avoid this issue.
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50264 |
Description: In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL.
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50262 |
Description: In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds write in trie_get_next_key()
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8.
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50261 |
Description: In the Linux kernel, the following vulnerability has been resolved:
macsec: Fix use-after-free while sending the offloading packet
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
Allocated by ta...
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50257 |
Description: In the Linux kernel, the following vulnerability has been resolved:
netfilter: Fix use-after-free in get_info()
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
get_info+0x128/0x180
do_ip6t_get_ctl+0x6a/0x430
nf_getsockopt+0x46/0x80
ipv6_getsockopt+0xb9/0x100
rawv6_getsockopt+0x42/0x190
do_sock_getsockopt+0xaa/0x180
__sys_getsockopt+0x70/0xc0
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0xa2/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table mo...
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50226 |
Description: In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [...
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50217 |
Description: In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
/ btrfs_device_1 → loop0
fs_device
\ btrfs_device_2 → loop1
2. mount /dev/loop0 /mnt
btrfs_open_devices
btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0)
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
fail: btrfs_close_devices // -ENOMEM
btrfs_close_bdev(btrfs_device_1)
fput(btrfs_device_1->bdev_file)
// btrfs_device_1->bdev_file is freed
btrfs_close_bdev(btrfs_device_2)
fput(btrfs_device_2->bdev_file)
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing...
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50154 |
Description: In the Linux kernel, the following vulnerability has been resolved:
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc3940c ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()...
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|
CVE-2024-50149 |
Description: In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't free job in TDR
Freeing job in TDR is not safe as TDR can pass the run_job thread
resulting in UAF. It is only safe for free job to naturally be called by
the scheduler. Rather free job in TDR, add to pending list.
(cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d)
CVSS: LOW (0.0) EPSS Score: 0.04%
December 12th, 2024 (5 months ago)
|