CyberAlerts is shutting down on June 30th, 2025. Thank you for your support!
Threat and Vulnerability Intelligence Database
Example Searches:
CVE
Threat Actors
Countries
Vendors
Severity
Known Exploited
CVE-2025-21650 |
Description: In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21649 |
Description: In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390...
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21648 |
Description: In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: clamp maximum hashtable size to INT_MAX
Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:
0708a0afe291 ("mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls")
Note: hashtable resize is only possible from init_netns.
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21647 |
Description: In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: add bounds checks to host bulk flow fairness counts
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
EPSS Score: 0.05%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21646 |
Description: In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the maximum cell name length
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a
problem occurs if someone actually does that: kafs tries to create a
directory under /proc/net/afs/ with the name of the cell, but that fails
with a warning:
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405
because procfs limits the maximum filename length to 255.
However, the DNS limits the maximum lookup length and, by extension, the
maximum cell name, to 255 less two (length count and trailing NUL).
Fix this by limiting the maximum acceptable cellname length to 253. This
also allows us to be sure we can create the "/afs/./" mountpoint too.
Further, split the YFS VL record cell name maximum to be the 256 allowed by
the protocol and ignore the record retrieved by YFSVL.GetCellName if it
exceeds 253.
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21645 |
Description: In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
[ij: edited the commit message.]
EPSS Score: 0.05%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21644 |
Description: In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix tlb invalidation when wedging
If GuC fails to load, the driver wedges, but in the process it tries to
do stuff that may not be initialized yet. This moves the
xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says,
it's a software-only initialization and should had been named with the
_early() suffix.
Move it to be called by xe_gt_init_early(), so the locks and seqno are
initialized, avoiding a NULL ptr deref when wedging:
xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed
xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged.
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3
Tainted: [U]=USER, [W]=WARN
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022
RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe]
This can be easily triggered by poking the GuC binary to force a
signature failure. There will still be an extra message,
xe 0000:03:00.0: [drm] *ERRO...
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21643 |
Description: In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix kernel async DIO
Netfslib needs to be able to handle kernel-initiated asynchronous DIO that
is supplied with a bio_vec[] array. Currently, because of the async flag,
this gets passed to netfs_extract_user_iter() which throws a warning and
fails because it only handles IOVEC and UBUF iterators. This can be
triggered through a combination of cifs and a loopback blockdev with
something like:
mount //my/cifs/share /foo
dd if=/dev/zero of=/foo/m0 bs=4K count=1K
losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0
echo hello >/dev/loop2046
This causes the following to appear in syslog:
WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs]
and the write to fail.
Fix this by removing the check in netfs_unbuffered_write_iter_locked() that
causes async kernel DIO writes to be handled as userspace writes. Note
that this change relies on the kernel caller maintaining the existence of
the bio_vec array (or kvec[] or folio_queue) until the op is complete.
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21642 |
Description: In the Linux kernel, the following vulnerability has been resolved:
mptcp: sysctl: sched: avoid using current->nsproxy
Using the 'net' structure via 'current' is not recommended for different
reasons.
First, if the goal is to use it to read or write per-netns data, this is
inconsistent with how the "generic" sysctl entries are doing: directly
by only using pointers set to the table entry, e.g. table->data. Linked
to that, the per-netns data should always be obtained from the table
linked to the netns it had been created for, which may not coincide with
the reader's or writer's netns.
Another reason is that access to current->nsproxy->netns can oops if
attempted when current->nsproxy had been dropped when the current task
is exiting. This is what syzbot found, when using acct(2):
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125
Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00
RSP: 0018:ffffc900034774e8 EFLAGS: 00010206
RAX: ...
EPSS Score: 0.05%
January 20th, 2025 (5 months ago)
|
|
CVE-2025-21641 |
Description: In the Linux kernel, the following vulnerability has been resolved:
mptcp: sysctl: blackhole timeout: avoid using current->nsproxy
As mentioned in the previous commit, using the 'net' structure via
'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'pernet' structure can be obtained from the table->data using
container_of().
EPSS Score: 0.04%
January 20th, 2025 (5 months ago)
|