CyberAlerts is shutting down on June 30th, 2025. Thank you for your support!
Threat and Vulnerability Intelligence Database
Example Searches:
CVE
Threat Actors
Countries
Vendors
Severity
Known Exploited
CVE-2024-50195 |
Description: In the Linux kernel, the following vulnerability has been resolved:
posix-clock: Fix missing timespec64 check in pc_clock_settime()
As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself.
CVSS: MEDIUM (5.5) EPSS Score: 0.03%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50194 |
Description: In the Linux kernel, the following vulnerability has been resolved:
arm64: probes: Fix uprobes for big-endian kernels
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding...
CVSS: MEDIUM (5.5) EPSS Score: 0.03%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50191 |
Description: In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set SB_RDONLY after filesystem errors
When the filesystem is mounted with errors=remount-ro, we were setting
SB_RDONLY flag to stop all filesystem modifications. We knew this misses
proper locking (sb->s_umount) and does not go through proper filesystem
remount procedure but it has been the way this worked since early ext2
days and it was good enough for catastrophic situation damage
mitigation. Recently, syzbot has found a way (see link) to trigger
warnings in filesystem freezing because the code got confused by
SB_RDONLY changing under its hands. Since these days we set
EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all
filesystem modifications, modifying SB_RDONLY shouldn't be needed. So
stop doing that.
CVSS: MEDIUM (5.5) EPSS Score: 0.02%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50185 |
Description: In the Linux kernel, the following vulnerability has been resolved:
mptcp: handle consistently DSS corruption
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
CVSS: MEDIUM (5.5) EPSS Score: 0.03%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50183 |
Description: In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
Deleting an NPIV instance requires all fabric ndlps to be released before
an NPIV's resources can be torn down. Failure to release fabric ndlps
beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID
to complete synchronously with usage of wait_queue.
CVSS: MEDIUM (4.7) EPSS Score: 0.02%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50176 |
Description: In the Linux kernel, the following vulnerability has been resolved:
remoteproc: k3-r5: Fix error handling when power-up failed
By simply bailing out, the driver was violating its rule and internal
assumptions that either both or no rproc should be initialized. E.g.,
this could cause the first core to be available but not the second one,
leading to crashes on its shutdown later on while trying to dereference
that second instance.
CVSS: MEDIUM (5.5) EPSS Score: 0.02%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50175 |
Description: In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: Remove use_count guard in stop_streaming
The use_count check was introduced so that multiple concurrent Raw Data
Interfaces RDIs could be driven by different virtual channels VCs on the
CSIPHY input driving the video pipeline.
This is an invalid use of use_count though as use_count pertains to the
number of times a video entity has been opened by user-space not the number
of active streams.
If use_count and stream-on count don't agree then stop_streaming() will
break as is currently the case and has become apparent when using CAMSS
with libcamera's released softisp 0.3.
The use of use_count like this is a bit hacky and right now breaks regular
usage of CAMSS for a single stream case. Stopping qcam results in the splat
below, and then it cannot be started again and any attempts to do so fails
with -EBUSY.
[ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
...
[ 1265.510630] Call trace:
[ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
[ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common]
[ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2]
[ 1265.510673] v4l_streamoff+0x24/0x30 [videodev]
[ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev]
[ 1265.510732] video_usercopy+0x304/0x8c4 [videodev]
[ 1265.510757] video_ioctl2+0x18/0x34 [videodev]
[ 1265...
CVSS: MEDIUM (5.5) EPSS Score: 0.03%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50172 |
Description: In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix a possible memory leak
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails
driver is not freeing the memory allocated for "rdev->chip_ctx".
CVSS: MEDIUM (5.5) EPSS Score: 0.03%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50163 |
Description: In the Linux kernel, the following vulnerability has been resolved:
bpf: Make sure internal and UAPI bpf_redirect flags don't overlap
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.
With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.
CVSS: MEDIUM (5.5) EPSS Score: 0.02%
May 4th, 2025 (about 2 months ago)
|
|
CVE-2024-50161 |
Description: In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the remaining info_cnt before repeating btf fields
When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
index 11 is out of range for type 'btf_field_info [11]'
CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_out_of_bounds+0x6f/0x80
? kallsyms_lookup_name+0x48/0xb0
btf_parse_fields+0x992/0xce0
map_create+0x591/0x770
__sys_bpf+0x229/0x2410
__x64_sys_bpf+0x1f/0x30
x64_sys_call+0x199/0x9f0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fea56f2cc5d
......
---[ end trace ]---
Fix it by checking the remaining info_cnt in btf_repeat_fields() before
repeating the btf fields.
CVSS: MEDIUM (5.5) EPSS Score: 0.03%
May 4th, 2025 (about 2 months ago)
|